Cell Counter
Disposable bllod cell counting chamber that achieved precision equal with made of the glass.
It is possible to measure twice with a chamber.
bridge Counting grid
Cover glass sample injection port
[Figure seen from side]
Cover glass(Thickness:300μm)
Plate Bridge (Depth (Height):100μm)
Because the distance of the grid and the cover glass
(the height of calculation chamber) always steadies
with the bridge on both sides of the grid, it is not
necessary to make Newton rings.
(Patent No.3329988)
SEM photograph
| Cat# | Type | Unit | Case |
 |
| 177-112C | CellCounter, improved Neubauer Type | 10plates | 30 units |
| 177-212C | CellCounter, Burker-Turk Type | 10plates | 30 units |
| 177-312C | CellCounter, Thoma Type | 10plates | 30 units |
| 177-512C | CellCounter, Fuchs Rosenthal Type | 10plates | 30 units |
Because the grid is carved like the same ditch made of the glass, the cell is never caught.
It is easy for the linearity and smoothness in the grid to excel the glass, and to see even the detail.
Watson (The grid line is concave) (SEM photograph. )
The glass (The grid line is concave) (SEM photograph. )
Others’ plastics (The grid line is convex) (SEM photograph. )
Because the cover glass has installed it, the operation is easy. The mismatched of measurements by the operator can be held down low.
Because they are all plastics, it is possible to abandon it including even the cover glass at the same time. There is no necessity of discretion.
Because the washing operation is unnecessary, and cutting use, it is effective as measures of the biohazard.
1.The sample of 15μl is injected from the sample injection part with a pipette.
2. Set in the microscope, and it leaves it sitting during 2 to 3 minute.
3.The cell is counted.
4. It calculates according to various calculation methods.
Accuracy in the grid is made while confirming it when the height of the lumen that has been confirmed with the electron microscope is manufactured.
Excellent for student experiment and a lot of samples at the same time is .
